Description
- 6 HB high current LED's
- Built in SMART driver - No External Driver needed
- PNP and NPN strobe
- Constant or Strobed Operation
- Integrated Potentiometer Dimming
- Remote Intensity Control - Analog 0-10VDC
Smart Vision Lights S75 Technical Specifications
S75 Continuous Operation Specifications
Electric Input | 24 VDC +/- 5% |
Input Current | Max. 400 mA |
Input Power | Max. 9.6 W |
PNP Trigger | 2.8 mA @ 4VDC | 8.8 mA @ 12VDC | 17.6 mA @ 24VDC |
NPN Trigger | 14.4 mA @ Common (0VDC) |
Trigger Input | PNP > +4 VDC (24 VDC max.) to activate or NPN ‰¥ GND <1VDC to activate (not both) |
Strobe Duration | Min. 30 μs | Max. ˆž |
Strobe Trigger Latency | 10 μs |
Power Indicator | Turns green when powered up |
Status Indicators | Strobe indicator will turn yellow when on |
Intensity Limit | 270° turn-pot. Turn clockwise to increase intensity limit. |
Analog Intensity | The output is adjustable from 10% - 100% of intensity limit by a 1 - 10 VDC signal. Jumpering pin 5 to pin 1 will provide maximum intensity |
Connection | 5-pin M12 connector |
Operating Temperature | -10° to 40° C (14° to 104° F) | RH max 80% non-condensing humidity |
Storage Temperature | -20° to 70° C (-4° to 158° F) | RH max 80% non-condensing humidity |
IP Rating | IP50 |
Weight | ~0.34 lbs | ~370 g |
Compliances | CE, IEC 62471, RoHS |
Warranty | 10 years1 |
BRICK LIGHT OVERVIEW
The Brick Light® has 6 high output, high current LED's in a small housing. Brick Light® is available in light output of White, Red, Amber, Blue, Green, Cyan IR and UV. Brick Light® includes an integrated constant current driver with a built in strobe input with option for PNP or NPN trigger control. No need for an external driver to control the light. The integrated driver also includes variable light intensity control. Light can be controlled by a manual potentiometer or a 0-10VDC analog signal.
Wavelength Colors
NOTE: This Light is also available in the following SWIR wavelengths: 1050nm, 1150nm, 1200nm, 1300nm, 1450nm, and 1550nm. Please contact us for pricing for these wavelengths.
WIRING
MOUNTING
Mounting is done by use of 4 through holes. Use M4 or 8-32 Hardware. Optional PB75-M5 Mounting Bracket is available.
ACCESSORIES