Description
The LHF300 Series of lights was designed as a direct LED replacement for standard fluorescent lighting and provides a homogeneous output. The plug and play design of the Direct-Connect Linear Light Series gives users tremendous flexibility without the concern for additional wiring. The LHF300 array utilizes 30 high intensity LEDs and features a diffuse lens cover designed to disperse the light in the same fashion as a fluorescent light of equivalent length and provides an even distribution. It also features an integrated constant current driver built into the light. Direct-Connect Series Linear Lights utilize 24VDC and can operate in continuous or strobe mode. NPN or PNP strobe triggers can be used to control the pulse of the light.
- Direct-Connect - Daisy Chain Up To 8 Units
- T-Slot for Mounting and Connecting Together
- 3-5x the Intensity of Constant ON
- Constant Current Driver Built In
- NPN and PNP Strobe Input
- OverDrive Mode Only
- Homogenous Light Pattern
Smart Vision Lights ODLHF300 Technical Specifications
LDHF300 Specifications
| Electrical Input | 24 V DC +/- 5% |
| Input Current | Max. 2A |
| Wattage | Max. 48 W |
| On/Off Input | PNP > +4 V DC or greater to activate | NPN > GND (<1 V DC) to activate |
| PNP Line | 4 mA @ 4 V DC | 10 mA @ 12 V DC | 20 mA @ 24 V DC |
| NPN Line | 15 mA @ Ground (0VDC) |
| Yellow Indicator Led | LED Strobe Indicator ON = Light Active |
| Green Indicator Led | ON = Power |
| Continuous Mode | NPN can be tied to ground OR PNP can be tied to 24 V DC (not both) |
| Potentiometer | 270º turn pot €“ Intensity control of 10% to 100%. Turn clockwise to increases intensity |
| Analog Intensity |
The output is adjustable from 10€“100% of brightness by a 1€“10 V DC signal. (Jumpering pin 5 to pin 1 will provide maximum intensity) |
| Connection | 5-pin M12 connector |
| Ambient Temperature | -18º€“40º C (0º€“104º F) |
| IP Rating | IP50 |
| Weight | ~455g |
| Compliances | CE, RoHS, IEC 62471 |