Description
Smart Vision Lights ODAL-150x150 Technical Specifications
ODAL-150x150 Continuous Operation Specifications
| Electrical Input | 24 VDC +/- 5% |
| Strobe Input | PNP: +4VDC to +24VDC to activate | NPN: GND (<1VDC) to activate |
| PNP Trigger | 4 mA @ 4VDC | 10 mA @ 12VDC | 20 mA @ 24VDC |
| NPN Trigger | 15 mA @ Ground (0VDC) |
| Analog Intensity | The output is adjustable from 10%€“100% of brightness by a 1€“10VDC analog signal line. Jumpering pin 5 to pin 1will provide maximum intensity. |
| Strobe/Pulse Time |
Max. 4000 SPS (Strobes Per Second) | Max. Single Pulse = 125 ms (See SafeStrobeTM Technology for more information.) |
| Duty Cycle |
Max. 10% |
| Conection | 5-pin M12 connector |
| Ambient Temperature | -18º€“40ºC (0º€“104ºF) |
| IP Rating | IP50 |
| Compliances | CE, RoHS, IEC 62471 |
| Warranty | 10 years. For complete warranty information, visit smartvisionlights.com/warranty. |
| Input Current | Peak 13 A during strobe |
| Input Power | 312 W |
The ODAL Area Light Series of spot lights is designed for OverDrive strobing and produces maximum light output. NPN or PNP trigger signals input can be used to control the pulse of the light. The intensity of the light can be controlled via 1-10VDC analog signal line. The 45 mm extrusion makes mounting the light easy when using drop-in T-nuts.
The AL Area Light has a built-in driver. No external driver is required..
Standard sizes are: 150×150, 300×150, and 300×300 €“ additional sizes are available upon request.
Wavelengths
Mounting
Smart Vision Lights recommends using drop- in T-nuts for mounting an ODAL Area Light. T-Slot size on AL extrusion is Bosch size 10 T-nut channel.
