Description
MBL Mini Backlights
The MBL Series of backlights is a mini back light with an ultra-slim design. Edge-enhancing technology is built-in to provide maximum contrast to backlit objects, providing the ability to get sharp images of round and highly reflective objects. The MBL Series is a Multi-Drive light capable of being adjusted remotely from a smartphone or tablet through SmartVisionLink.
MBL mini backlights provide a high density of LED€™s with an active area ranging from 25 x 25 mm to 100 x 100 mm. The integrated constant current Multi-Drive LED driver simplifies installation and use while delivering either constant or strobe operation. And with a surface illuminance of up to 190,000 lux in continuous mode and 2,180,000 lux in OverDrive, these are seriously bright backlights.
Give yourself an edgeBuilt-in edge enhancing technology provides collimated lighting for uniform, consistent light. Get excellent edge contrast for shiny parts and curved edges while improving overall image clarity.
Product Details
- Built-in Multi-Drive Driver
- 24VDC
- NPN and PNP Strobe
- Blue 470nm, Red 625nm, IR 850nm and White available standard
- Analog intensity 0-10VDC signal
Smart Vision Lights MBL-25x25 Technical Specifications
MBL-25x25 Continuous Operation Specifications
Electrical Input | 24 VDC +/- 5% |
Input Current |
MBL-25x25 | Max 0.20 A |
Input Power |
MBL-25x25 | Max 4.8 W |
PNP Trigger | 2.0 @ 4 VDC | 7.0 mA @ 12 VDC | 13.4 mA @ 24 VDC |
NPN Trigger | 12 mA @ Common (0VDC) |
Trigger Input |
PNP > +3.3 VDC (24 VDC max.) to activate or NPN > GND (<1VDC) to activate (not both) |
Strobe Duration | Min. 30 μs | Max. ˆž |
Strobe Trigger Latency | 10 μs |
Duty Cycle | Not Applicable |
Analog Intensity | The output is adjustable from 10% - 100% of intensity limit by a 1 - 10 VDC signal. Jumpering pin 5 to pin 1 will provide maximum intensity. Intensity can be remotely adjusted via SmartVisionLink |
Connection | 5-pin M12 connector |
Operating Temperature | -10° to 40° C (14° to 104° F) | RH max 80% non-condensing humidity |
Storage Temperature | -20° to 70° C ( -4° to 158° F) | RH max 80% non-condensing humidity |
IP Rating | IP50 |
Weight |
MBL-25x25 | ~0.25 lbs (0.10 kgs) |
Compliances | FCC, CE, CSA, KC, UL61010, RoHS, REACH, WEEE, IEC 62471 |
Warranty | 10 years |
MBL-25x25 Strobe Operation Specifications
Electrical Input | 24 VDC +/- 5% |
Input Current |
MBL-25x25 | Max 0.23 A |
Input Power |
MBL-25x25 | Max 7.2 W |
PNP Trigger | 2.0 @ 4 VDC | 7.0 mA @ 12 VDC | 13.4 mA @ 24 VDC |
NPN Trigger | 12 mA @ Common (0VDC) |
Trigger Input |
PNP > +3.3 VDC (24 VDC max.) to activate or NPN > GND (<1VDC) to activate (not both) |
Strobe Duration | Min. 30 μs | Max. 50ms |
Strobe Frequency | Max 4 kHz or 1 / Duty Cycle as calculated, whichever is less. |
Strobe Trigger Latency | 6 μs |
Duty Cycle | Not Applicable |
Analog Intensity | The output is adjustable from 10% - 100% of intensity limit by a 1 - 10 VDC signal. Jumpering pin 5 to pin 1 will provide maximum intensity. Intensity can be remotely adjusted via SmartVisionLink |
Connection | 5-pin M12 connector |
Operating Temperature | -10° to 40° C (14° to 104° F) | RH max 80% non-condensing humidity |
Storage Temperature | -20° to 70° C ( -4° to 158° F) | RH max 80% non-condensing humidity |
IP Rating | IP50 |
Weight |
MBL-25x25 | ~0.25 lbs (0.10 kgs) |
Compliances | FCC, CE, CSA, KC, UL61010, RoHS, REACH, WEEE, IEC 62471 |
Warranty | 10 years |
Smart Vision Link
With integrated SmartVisionLink, the LSR300 can be used with Smart Vision Light€™s Bluetooth module (BTM-1000*). Users can install the SmartVisionLink app on Android or Apple phones and tablets to configure lighting parameters for each of the four lighting zones. Zone parameters include 10-100% intensity for both continuous and OverDrive strobe modes, as well as zone-disable. After parameters are set and saved, the BTM-1000 can be removed from the LSR300 and settings will be retained in LSR300E€™s static memory. The SmartVisionlink app is available at no cost from the Google Play Store or Apple€™s App Store. |
*The BTM-1000 is sold separately.
Available Wavelengths
Multi-Drive Wiring
Wiring Configuration for CONSTANT ON Operation
Wiring Configuration for STROBE/PULSE Overdrive Operation