MBL-100x100-WHI Miniature Backlight (4" x 4")

MBL-100x100 Miniature Backlight (4" x 4")

MBL-100x100-850 Miniature Backlight (4" x 4")

MBL-100x100-470 Miniature Backlight (4" x 4")

MBL-100x100-625 Miniature Backlight (4" x 4")

Roll over image to zoom in Click on image to zoom

MBL-100x100 Miniature Backlight (4" x 4")

Smart Vision Lights

Color: WHITE

Variant

Price:

$1,154.00

Quantity:

Share this product

MBL Mini Backlights

The MBL Series of backlights is a mini back light with an ultra-slim design. Edge-enhancing technology is built-in to provide maximum contrast to backlit objects, providing the ability to get sharp images of round and highly reflective objects. The MBL Series is a Multi-Drive light capable of being adjusted remotely from a smartphone or tablet through SmartVisionLink.

Seriously small. Seriously bright.

MBL mini backlights provide a high density of LED€™s with an active area ranging from 25 x 25 mm to 100 x 100 mm. The integrated constant current Multi-Drive LED driver simplifies installation and use while delivering either constant or strobe operation. And with a surface illuminance of up to 190,000 lux in continuous mode and 2,180,000 lux in OverDrive, these are seriously bright backlights.

Give yourself an edge

Built-in edge enhancing technology provides collimated lighting for uniform, consistent light. Get excellent edge contrast for shiny parts and curved edges while improving overall image clarity.

Product Details

Built-in Multi-Drive Driver
24VDC
NPN and PNP Strobe
Blue 470nm, Red 625nm, IR 850nm and White available standard
Analog intensity 0-10VDC signal

Smart Vision Lights MBL-100x100 Technical Specifications

MBL-100x100 Continuous Operation Specifications

Electrical Input	24 VDC +/- 5%
Input Current	MBL-100x100 \| Max 0.50 A
Input Power	MBL-100x100 \| Max 12 W
PNP Trigger	2.0 @ 4 VDC \| 7.0 mA @ 12 VDC \| 13.4 mA @ 24 VDC
NPN Trigger	12 mA @ Common (0VDC)
Trigger Input	PNP > +3.3 VDC (24 VDC max.) to activate or NPN > GND (<1VDC) to activate (not both)
Strobe Duration	Min. 30 μs \| Max. ˆž
Strobe Trigger Latency	10 μs
Duty Cycle	Not Applicable
Analog Intensity	The output is adjustable from 10% - 100% of intensity limit by a 1 - 10 VDC signal. Jumpering pin 5 to pin 1 will provide maximum intensity. Intensity can be remotely adjusted via SmartVisionLink
Connection	5-pin M12 connector
Operating Temperature	-10° to 40° C (14° to 104° F) \| RH max 80% non-condensing humidity
Storage Temperature	-20° to 70° C ( -4° to 158° F) \| RH max 80% non-condensing humidity
IP Rating	IP50
Weight	MBL-100x100 \| ~0.60 lbs (0.27 kgs)
Compliances	FCC, CE, CSA, KC, UL61010, RoHS, REACH, WEEE, IEC 62471
Warranty	10 years

MBL-100x100 Strobe Operation Specifications

Electrical Input	24 VDC +/- 5%
Input Current	MBL-100x100 \| Max 5.00 A
Input Power	MBL-100x100 \| Max 120 W
PNP Trigger	2.0 @ 4 VDC \| 7.0 mA @ 12 VDC \| 13.4 mA @ 24 VDC
NPN Trigger	12 mA @ Common (0VDC)
Trigger Input	PNP > +3.3 VDC (24 VDC max.) to activate or NPN > GND (<1VDC) to activate (not both)
Strobe Duration	Min. 30 μs \| Max. 50ms
Strobe Frequency	Max 4 kHz or 1 / Duty Cycle as calculated, whichever is less.
Strobe Trigger Latency	6 μs
Duty Cycle	Not Applicable
Analog Intensity	The output is adjustable from 10% - 100% of intensity limit by a 1 - 10 VDC signal. Jumpering pin 5 to pin 1 will provide maximum intensity. Intensity can be remotely adjusted via SmartVisionLink
Connection	5-pin M12 connector
Operating Temperature	-10° to 40° C (14° to 104° F) \| RH max 80% non-condensing humidity
Storage Temperature	-20° to 70° C ( -4° to 158° F) \| RH max 80% non-condensing humidity
IP Rating	IP50
Weight	MBL-100x100 \| ~0.60 lbs (0.27 kgs)
Compliances	FCC, CE, CSA, KC, UL61010, RoHS, REACH, WEEE, IEC 62471
Warranty	10 years

Smart Vision Link

With integrated SmartVisionLink, the LSR300 can be used with Smart Vision Light€™s Bluetooth module (BTM-1000*). Users can install the SmartVisionLink app on Android or Apple phones and tablets to configure lighting parameters for each of the four lighting zones. Zone parameters include 10-100% intensity for both continuous and OverDrive strobe modes, as well as zone-disable. After parameters are set and saved, the BTM-1000 can be removed from the LSR300 and settings will be retained in LSR300E€™s static memory. The SmartVisionlink app is available at no cost from the Google Play Store or Apple€™s App Store.