Description
Smart Vision Lights LM75 Mini Linear Light
The Smart Vision Lights (SVL) LM75 Mini Linear Light features a built in driver which includes Multi-Drive capabilities. Multi-Drive allows the user to operate this light in constant ON operation or OverDrive (High-Intensity Strobe) operation. The industry standard 5 Pin M12 connector makes for simple wiring and the multiple lensing options gives this light a broad spectrum of illumination area. The 0-10V analog control gives the user total control over intensity.
Product Details
- Driver Built In - No External Wiring To A Driver
- 5 Pin M12 Quick Disconnect Cable
- Over-Current Protection
- PNP and NPN Strobe Input
- Continuous Operation or Strobe Mode
- (8) High Output LEDs
Smart Vision Lights smallest, most compact linear lights are the mini LED linear lights. (LM Family). These lights are extremely bright and available in multiple wavelengths to meet your application needs.
Smart Vision Lights LM75 Technical Specifications
LM75 Continuous Operation Specifications
| Electrical Input | 24 VDC +/- 5% |
| Input Current | Max. 275 mA |
| Input Power | Max. 6.6 W |
| PNP Trigger | 2.8 mA @ 4 VDC | 8.8 mA @ 12 VDC | 17.6 mA @ 24VDC |
| NPN Trigger | 14.4 mA @ Common (0VDC) |
| Trigger Input | PNP > +4 VDC (24 VDC max.) to activate or NPN > GND (<1VDC) to activate (not both) |
| Mode Control | Connect pin 5 to 1-10 VDC (10 - 100% output); 24 VDC (Max) |
| Strobe Duration | Min. 30 μs | Max. ˆž |
| Strobe Trigger Latency | 10 μs |
| Strobe Frequency | Max 4 kHz or 1 / Duty Cycle as calculated, whichever is less.1 |
| Duty Cycle | Not applicable |
| Analog Intensity | The output is adjustable from 10% - 100% of intensity limit by a 1 - 10 VDC signal. Jumpering pin 5 to pin 1 will provide maximum intensity. |
| Connection | 5-pin M12 connector |
| Operating Temperature | -10° to 40° C (14° to 104° F) | RH max 80% non-condensing humidity |
| Storage Temperature | -20° to 70° C ( -4° to 158° F) | RH max 80% non-condensing humidity |
| IP Rating | IP65 |
| Weight | ~0.28 lb | ~128 g |
| Compliances | CE, IEC-62471, RoHS |
| Warranty | 10 years2 |
LM75 OverDrive Operation Specifications
| Electrical Input | 24 VDC +/- 5% |
| Input Current | Peak 3.1 A |
| Input Power | Peak 74.4 W |
| PNP Trigger | 2.8 mA @ 4 VDC | 8.8 mA @ 12 VDC | 17.6 mA @ 24VDC |
| NPN Trigger | 14.4 mA @ Common (0VDC) |
| Trigger Input | PNP > +4 VDC (24 VDC max.) to activate or NPN > GND (<1VDC) to activate (not both) |
| Mode Control | Connect pin 5 to GND (See wiring configuration for more information) |
| Strobe Duration | Min. 30 μs | Max. 50 ms |
| Strobe Trigger Latency | 6 μs |
| Strobe Frequency | Max 4 kHz or 1 / Duty Cycle as calculated, whichever is less.1 |
| Duty Cycle | Max. 10%1 |
| Analog Intensity | The output is adjustable from 10% - 100% of intensity limit by a 1 - 10 VDC signal. Jumpering pin 5 to pin 1 will provide maximum intensity. |
| Connection | 5-pin M12 connector |
| Operating Temperature | -10° to 40° C (14° to 104° F) | RH max 80% non-condensing humidity |
| Storage Temperature | -20° to 70° C ( -4° to 158° F) | RH max 80% non-condensing humidity |
| IP Rating | IP65 |
| Weight | ~0.28 lb | ~128 g |
| Compliances | CE, IEC-62471, RoHS |
| Warranty | 10 years2 |
Multi-Drive
The Multi-Drive controller combines the Constant ON operation and OverDrive Strobe (high pulse operation) into one easy to use product. The Multi-Drive controller allows the user to run the product in Constant ON operation or pulse/strobe the light at the maximum allowed intensity by the LED manufacturer by simply setting the product parameters. The built-in Multi-Drive also protects the LEDs from premature degradation and failure caused by excessive heat by regulating the current delivered to the LEDs and limiting the duty cycle of the light.
Wavelength Colors
Multi-Drive Wiring
Wiring Configuration for CONSTANT ON Operation
Wiring Configuration for STROBE/PULSE Operation
MOUNTING
Mounting is done by use of the rear T-slot mount
Includes (2) M4x16 screws and (2) M4 nylon nuts
