Description
The L300G2 linear light features an integrated Multi-Drive driver that can produce up to 390,000 lux. NPN or PNP triggers can control the light for either OverDrive or continuous operation. Control light intensity via 1 ‚¬€œ 10 VDC analog intensity line or remotely using SmartVisionLink. Daisy-chain up to six L300G2 lights in series using a standard 5-pin M12 jumper cable.
L300G2 Technical Specifications
Continuous Operation Specifications:
| Electrical Input | 24 VDC +/- 5% |
| Input Current | 850 mA Maximum |
| Input Power | 20 Watts Maximum |
| PNP Trigger | 2 mA @ 4VDC 7 mA @ 12VDC 13.4 mA @ 24VDC |
| NPN Trigger | 12 mA @ Common (0VDC) |
| Trigger Input | PNP > +4 VDC (24 VDC max.) to activate or NPN €°¥ GND <1VDC to activate (not both) |
| Mode Control | Connect pin 5 to 1-10 VDC (10 - 100% output); 24 VDC Maximum |
| Strobe Duration | 10 µs Minimum ˆž Maximum |
| Strobe Frequency | Max 4 kHz or 1 / Duty Cycle as calculated, whichever is less. |
| Strobe Trigger Latency | 6 µs |
| Duty Cycle | Not Applicable |
| Power Indicator | Turns Green When Powered Up |
| Status Indicators | Strobe Indicator Will Turn Red When On |
| Analog Intensity | The output is adjustable from 10% - 100% of the intensity limit by a 1 - 10 VDC signal. Jumpering pin 5 to pin 1 will provide maximum intensity. Intensity can be remotely adjusted via SmartVisionLink |
| Connection | 5-pin M12 Connector |
| Operating Temperature | -10° to 40° C (14° to 104° F) RH maximum 80% non-condensing humidity |
| Storage Temperature | -20° to 70° C (-4° to 158° F) RH maximum 80% non-condensing humidity |
| IP Rating | IP50 |
| Weight | ~370 Grams / ~0.81 Pounds |
| Compliances | CE, IEC 62471, RoHS |
| Warranty | 10 Years |
OverDrive Operation Specifications:
| Electrical Input | 24 VDC +/- 5% |
| Input Current | 6 A Peak, During Strobe |
| Input Power | 144 Watts Peak, During Strobe |
| PNP Trigger | 2 mA @ 4VDC 7 mA @ 12VDC 13.4 mA @ 24VDC |
| NPN Trigger | 12 mA @ Common (0VDC) |
| Trigger Input | PNP > +4 VDC (24 VDC max.) to activateor NPN €°¥ GND <1VDC to activate (not both) |
| Mode Control | Connect pin 5 to GND (See wiring configuration for more information) |
| Strobe Duration | 10 µs Minimum 50 ms Maximum |
| Strobe Frequency | Max 4 kHz or 1 / Duty Cycle as calculated, whichever is less. |
| Strobe Trigger Latency | 6 µs |
| Duty Cycle | 10% Maximum |
| Power Indicator | Turns Green When Powered Up |
| Status Indicators | Strobe Indicator Will Turn Red When On |
| Analog Intensity | The output is adjustable from 10% - 100% of the intensity limit by a 1 - 10 VDC signal. Jumpering pin 5 to pin 1 will provide maximum intensity. Intensity can be remotely adjusted via SmartVisionLink |
| Connection | 5-pin M12 Connector |
| Operating Temperature | -10° to 40° C (14° to 104° F) RH maximum 80% non-condensing humidity |
| Storage Temperature | -20° to 70° C (-4° to 158° F) RH maximum 80% non-condensing humidity |
| IP Rating | IP50 |
| Weight | ~370 Grams / ~0.81 Pounds |
| Compliances | CE, IEC 62471, RoHS |
| Warranty | 10 Years |
Wavelength Colors:
Recommended Usage:
Bright Field, Dark Field, Direct Lighting
Wiring:
Continuous Operation:
OverDrive Operation:
