Description
JWL225-MD Camera to Light Series Ring Lights
The JWL225-MD, part of the Camera to Light (CTL) Series, is an intense light source meant to provide external illumination for machine vision cameras or smart cameras where the built-in illumination is not enough. This light can be connected directly to camera housings through optional mounting plates to illuminate areas larger than what is normally covered by the camera€™s internal light source. The JWL225-MD is compatible with many machine vision cameras and can be directly connected and controlled through a camera€™s trigger output.
Smart Vision Lights JWL225-MD Technical Specifications
Continuous Operation Specifications| Electrical Input | 24VDC +/€“5% |
| Input Current | 1.4 A Maximum |
| Input Power | 34 Watts |
| PNP Trigger |
2 mA @ 4 VDC |
| NPN Trigger | 9.9 mA @ Common (0VDC) |
| Trigger Input | PNP > +3.3 VDC (24 VDC max.) to activate or NPN > GND (<1.4 VDC) to activate (not both) |
| Mode Control | Connect pin 5 to 1-10 VDC (10 - 100% output) 24 VDC Maximum |
| Strobe Duration | Minimum 30 μs | Maximum ˆž |
| Strobe Trigger Latency |
30 μs |
| Strobe Frequency |
Max 4 kHz or 1 / Duty Cycle as calculated, whichever is less. |
| Duty Cycle | Not Applicable |
| Analog Intensity | The output is adjustable from 10% - 100% of intensity limit by a 1 - 10 VDC signal. Jumpering pin 5 to pin 1 will provide maximum intensity. Intensity limit can be remotely adjusted via SmartVisionLink |
| Connection | 5-pin M12 connector |
| Operating Temperature | -10° - 40° C (14° - 104° F) RH max 80% non-condensing humidity |
| Storage Temperature | -20° to 70° C (-4° to 158° F) RH max 80% non-condensing humidity |
| IP Rating | IP65 |
| Weight | 3.3 pounds | 1.5 kg |
| Compliances | CE, IEC-62471, RoHS, UL, CSA, FCC, KCC Pending |
| Warranty | 10 Years |
OverDrive Operation Specifications
| Electrical Input | 24VDC +/€“5% |
| Input Current | 13 A Peak, During Strobe |
| Input Power | 313 Watts Peak, During Strobe |
| PNP Trigger |
2 mA @ 4 VDC |
| NPN Trigger | 9.9 mA @ Common (0VDC) |
| Trigger Input | PNP > +3.3 VDC (24 VDC max.) to activate or NPN > GND (<1.4 VDC) to activate (not both) |
| Mode Control | Connect pin 5 to GND |
| Strobe Duration | 10 μs Minimum 50 ms Maximum |
| Strobe Trigger Latency |
6 μs |
| Strobe Frequency |
Max 4 kHz or 1 / Duty Cycle as calculated, whichever is less. |
| Duty Cycle | 10% Maximum |
| Analog Intensity | The output is adjustable from 10% - 100% of the intensity limit by a 1 - 10 VDC signal. Jumpering pin 5 to pin 1 will provide maximum intensity. The intensity limit can be remotely adjusted via SmartVisionLink |
| Connection | 5-pin M12 connector |
| Operating Temperature | -10° - 40° C (14° - 104° F) RH max 80% non-condensing humidity |
| Storage Temperature | -20° to 70° C (-4° to 158° F) RH max 80% non-condensing humidity |
| IP Rating | IP65 |
| Weight | 3.3 pounds | 1.5 kg |
| Compliances | CE, IEC-62471, RoHS, UL, CSA, FCC, KCC Pending |
| Warranty | 10 Years |
Recommended Illumination Usage: Bright Field, Direct Lighting
Wavelength Colors:
OverDrive Operation Wiring:
Continuous Operation Wiring:
JWL225-MD Accessories:
