Description
JWL150-DO Lightgistics Ring Lights
Smart Vision Lights JWL150-DO Technical Specifications
Deca OverDrive Operation Specifications
| Electrical Input | 24VDC +/€“5% |
| Input Current | 760 mA Average Max | Peak 2.3 A Charge Rate |
| Input Power | Max. 18.2 W |
| PNP Trigger | 2 mA @ 4 VDC | 7 mA @ 12 VDC | 13.4 @ 24 VDC |
| NPN Trigger | 9.9 mA @ Common (0VDC) |
| Trigger Input | PNP > +3.3 VDC (24 VDC max.) to activate or NPN > GND (<1.4 VDC) to activate (not both) |
| Mode Control | Connect pin 5 to 1-10 VDC (10 - 100% output); 24 VDC (Max) |
| Strobe Duration | Min. 10 µs | Max. 1 ms |
| Strobe Trigger Latency | Max 4 kHz or 1 / Duty Cycle as calculated, whichever is less.2 |
| Duty Cycle | 3.5% |
| Analog Intensity | The output is adjustable from 50% - 100% of the intensity limit by a 1 - 9 VDC signal. Jumpering pin 5 to pin 1 will provide maximum intensity. |
| Connection | 5-pin M12 connector |
| Operating Temperature | -10° - 40° C (14° - 104° F) | RH max 80% non-condensing humidity |
| Storage Temperature | -20° to 70° C | RH max 80% non-condensing humidity |
| Ip Rating | IP65 |
| Weight | 1451.5 g |
| Compliances | CE, IEC-62471, RoHS, UL, CSA, FCC, KCC Pending |
| Warranty | 10 Years* |
Standard OverDrive Operation Specifications
| Electrical Input | 24VDC +/€“5% |
| Input Current | 760 mA Average Max | Peak 2.3 A Charge Rate |
| Input Power | Max. 18.2 W |
| PNP Trigger | 2 mA @ 4 VDC | 7 mA @ 12 VDC | 13.4 @ 24 VDC |
| NPN Trigger | 9.9 mA @ Common (0VDC) |
| Trigger Input | PNP > +3.3 VDC (24 VDC max.) to activate or NPN > GND (<1.4 VDC) to activate (not both) |
| Mode Control | Connect pin 5 to 1-10 VDC (10 - 100% output); 24 VDC (Max) |
| Strobe Duration | Beginning at 1 ms1 | Max 9 ms |
| Strobe Trigger Latency | Max 4 kHz or 1 / Duty Cycle as calculated, whichever is less.2 |
| Duty Cycle | 3.5% |
| Analog Intensity | Not Applicable |
| Connection | 5-pin M12 connector |
| Operating Temperature | -10° - 40° C (14° - 104° F) | RH max 80% non-condensing humidity |
| Storage Temperature | -20° to 70° C | RH max 80% non-condensing humidity |
| Ip Rating | IP65 |
| Weight | 1451.5 g |
| Compliances | CE, IEC-62471, RoHS, UL, CSA, FCC, KCC Pending |
| Warranty | 10 Years* |
Ring Light Overview
The JWL150-DO is an OverDrive-only light source that provides external illumination for logistics. This light can be mounted to camera housings through optional mounting plates. The JWL150-DO is compatible with many common major machine vision cameras and can be directly connected and controlled through a camera€™s trigger output.
Recommended Illumination Usage: Bright Field, Direct Lighting
Wavelength Colors
OverDrive„¢ Wiring:
Mounting:
JWL150-DO Lights feature two slots for quick and easy installation. These lights come with two T-bolts, washers, and nuts.
JWL150-DO Accessories
